Elsist UPS Nemo LCD 200 2000VA/1000W, Line-Interactive, USB, RJ11/RJ45, 2×IEC, 2×Schuko, 2×9Ah, 10min. autonomija

Main characteristics
FULL POWER PROTECTION
- Electrical noise suppression, voltage and overvoltage peak suppression, autonomy, are common requirements to many UPS types
- This UPs provides a wider voltage range capability, in addition to the aforementioned characteristics
- Within this wide voltage range, the load is supplied without any support from the battery
- This feature not only protects your computer, but also improve and increases battery lifetime

COLD START FUNCTION (DC START)
- All NEMO2.0 models are equipped with cold start function, which means that even if the power supply is unplugged, the UPS can be activated simply by pushing the ON / OFF switch and will operated supplied by the battery

AUTORESTART
- Upon returning the Mains, the UPS will restart automatically

OVERLOAD PROTECTION
- The internal microprocessor controls the load status in any operating conditions
- In the event of overload or short circuit, your UPS will beep or will automatically turn off to avoid undesired damage to the load

MODEM CONNECTION AND PROTECTION
- Two special connectors RJ45/RJ11, will protect your Modem or your LAN 10Base-T network from any noise generated by the phone line

POWER MANAGEMENT SOFTWARE
- NEMO2.0 series includes UPSilon software that enables communication between the UPS and a PC. By connecting the USB port of the UPS to a corresponding PC port, you can either check or do the following:
* to control UPS and battery status
* to save vital files during unattended shutdown
* to plan Turn off and Turn on of the UPS for energy saving
* to Log the UPS activities and status for checking them over the time

- All controls are performed and guaranteed by a high reliability microprocessor
- "Green Power" function for energy saving
- Light weight and compact dimensions

Specifications
INPUT
- Input Voltage: 220-230-240Vac
- Input voltage range: 162-290Vac
- Frequency: 50/60Hz (auto selection)

OUTPUT
- Output Voltage: 230Vac
- Voltage tolerance: +/-10%
- Frequency: 50/60Hz (following input frequency)
- Power: 2000VA
- Active Power: 1000W
- Switching time: 2-6 mS tpc
- IEC outlet: 2
- Schuko outlet: 2

NOISE FILTERING
- Modem / T port (10BaseT/100baseT): RJ11/RJ45 (network compatible)

BATTERY
- Typ. Autonomy time: 10 min
- Battery capacity: 2× 9Ah
- Type: Maintenance-free, sealed lead-acid
- Recharging time: 6-8 hr at 90% after a deep discharge

PROTECTION
- Overvoltage/Undervoltage: Switch to "Battery mode"
- Overload/Shortcircuit: Fuse and Electronic threshold (both on "Mains mode" and on "Battery mode")

MECHANICAL CHARACTERISTICS
- Dimensions (W×D×H): 158×380×198 mm
- Weight: 10 kg

ENVIROMENT
- Ambient: Temperature 0C to 40C, Humidity 0-90% without condensation, altitude max. 3000 mt.
- Audible noise: < 40dbA (measured at 1mt.) both on "Mains mode" and on "Battery mode"

STANDARD
- IEC/EN62040-1 IEC/EN62040-2 IEC/EN62040-3 IEC/EN60950-1